TOP 25 DIY Goat Toys Ideas [Easy To Make]

Creating goat toys can be a rewarding and cost-effective way to keep your goats entertained and active.

By making DIY goat toys, you can use everyday materials to design engaging and durable items that will enrich your goats’ environment.

It will not only help reduce their boredom but also promote their overall well-being and happiness.

Let’s explore some exciting ideas.

DIY Goat Toys Ideas

Goat toys are essential for keeping goats active and healthy. These toys come in various forms such as balls, climbing structures, and ropes.

They help prevent boredom and encourage natural behaviors like climbing and headbutting.

Providing goats with toys not only keeps them physically fit but also stimulates their minds, reducing stress and improving overall well-being.

By incorporating these toys into their environment, goat owners can ensure their animals lead happier, more engaging lives.

1. DIY Goat Climbing Ramp

To build a simple ramp, you will need wooden planks, screws, nails, a hammer, a saw, measuring tape, sandpaper, and paint (optional).

Measure the length and width you want for the ramp and cut the wooden planks to the correct size with the saw.

Now, lay two long planks parallel to each other to form the sides of the ramp. Place smaller planks between them horizontally at regular intervals to make steps.

Secure these horizontal planks to the sides using screws and nails, making sure they are evenly spaced.

Then, sand down any rough edges to prevent splinters. If you like, you can paint the ramp in any color you choose.

Lastly, position the ramp at a slight incline in the goat enclosure for easy access.

2. DIY Goat Tire Climbing Tower

To create a sturdy and functional structure using old tires, gather old tires, wooden planks, screws, nails, a hammer, a drill, a measuring tape, sandpaper, and optionally, paint.

Start by gathering old tires that are of similar sizes, then wash and dry them completely. Drill holes in the tires to allow water to drain and avoid accumulation.

Now, stack the tires one on top of the other. Secure the tires together by using wooden planks and screws at multiple points to ensure stability.

Sand down any rough edges on the wooden planks to prevent injuries. If desired, you can paint the tires and planks for a more polished look. Place the finished tire tower in the goat enclosure.

3. DIY Goat Playground Bridge

To build a simple wooden bridge for your goats, collect wooden planks, rope, screws, nails, a hammer, a saw, a measuring tape, sandpaper, and optionally, paint.

Measure and cut the wooden planks to the desired length and width for the bridge. Drill holes at the ends of each plank so the rope can pass through.

Thread the rope through the holes in each plank and leave some slack to allow the bridge to sway slightly. Knot the rope at the ends of each plank to keep them secure.

Attach the ends of the ropes to sturdy posts or trees within the goat enclosure. Sand down any rough edges on the planks to ensure safety.

If you wish, you can paint the bridge to add some color. Make sure the bridge is stable and safe for the goats to use.

4. DIY Goat Chew Toys

To make a chew toy for your goats, pick wood blocks that are safe for goats to chew on. Cut the blocks to a good size for the goats.

Drill holes through the center of each block and sand down any rough edges to prevent splinters. Then, thread a strong rope through the holes in the blocks.

Tie knots between each block to keep them apart. Knot the ends of the rope securely to ensure the blocks don’t slip off.

Hang the chew toy in the goat enclosure at a height that is easy for them to reach.

5. DIY Goat Tunnel

To build a tunnel for the goat enclosure, you will need large PVC pipes, a saw, sandpaper, and optionally, some paint.

Measure and cut the PVC pipes to the length you want for the tunnel. Then, use the sandpaper to smooth out any rough edges, which will help prevent injuries.

Fit the pipes together to form a long tunnel, making sure that all connections are secure and stable.

If you want, you can paint the pipes for a better look. Place the tunnel in the goat enclosure.

6. DIY Goat Balance Beam

To build a balance beam, measure and cut the wooden planks to your preferred length for the beam. Next, use sandpaper to smooth out any rough edges.

Then, cut additional planks to serve as supports for each end of the beam. Attach the beam to these supports using screws and nails to ensure stability.

If you want, you can paint the balance beam to add some color. Place the completed balance beam in the goat enclosure, making sure it is at a safe height for the goats to use.

7. DIY Goat Swing

To build a simple and safe goat swing, you will need a wooden board, rope, a drill, sandpaper, and optional paint.

Select a strong wooden board to serve as the platform. Cut it to a suitable size for the swing. Using a drill, create holes at each corner of the board for the rope.

Smooth out any rough edges with sandpaper. Then, thread a sturdy rope through the holes and securely knot it underneath the board.

Tie the other ends of the rope to a solid tree branch or post. If you want, you can paint the swing for a colorful touch. Lastly, make sure the swing is stable.

8. DIY Goat Puzzle Feeder

To create a simple puzzle feeder for goats, you will need a large plastic container with a lid, a drill, sandpaper, rope, and some treats or hay.

Select a large plastic container with a secure lid. Use the drill to make several holes in both the sides and the lid of the container.

After drilling, smooth any rough edges around the holes using sandpaper to ensure safety. Fill the container with treats or hay and securely close the lid.

Attach a piece of rope to the container, allowing it to be hung or dragged. Hang or place the puzzle feeder in the goat enclosure and let the goats enjoy it.

9. DIY Goat Seesaw

To build a simple seesaw, measure and cut the wooden plank to your desired length for the seesaw.

Now, sand down any rough edges to make it smooth and safe. Find a log or sturdy base that will balance the seesaw.

Attach the plank to the log or base with screws and nails, making sure it can pivot properly. You can paint the seesaw if you like. Place the seesaw in the goat enclosure.

10. DIY Goat Scratching Post

To create a goat scratching post, you will need a sturdy wooden post, sisal rope, nails, a hammer, sandpaper, and optional paint.

Select a solid wooden post and sand down any rough edges. Then, wrap the sisal rope tightly around the post from the top to the bottom, securing the ends with nails.

If you want, you can paint the post for a finished look. Install the scratching post securely in the goat enclosure.

11. DIY Goat Obstacle Course

To build an obstacle course for goats, gather wooden planks, tires, rope, screws, nails, a hammer, a saw, measuring tape, sandpaper, and paint if you want to make it colorful.

Start by designing the layout of your obstacle course. Use the wooden planks, tires, and ropes to create different challenges like hurdles, tunnels, and balance beams.

Sand down any rough edges on the wooden parts to make them smooth. Put together and secure each obstacle according to your plan.

If you want, you can paint the obstacles to make them look nice. Make sure all obstacles are stable and safe for the goats. Set up the obstacle course in the goat enclosure.

12. DIY Goat Climbing Wall

To build a climbing wall for goats, choose a strong wooden board. Measure and cut it to the size you want. Sand down any rough edges.

Attach the climbing holds to the board with screws. You can paint the board if you like.

Now, install the climbing wall securely in the goat enclosure at a safe angle.

13. DIY Goat Tugging Toy

To make a simple and fun tugging toy for goats, collect a thick rope, an old rubber tire, a drill, and some sandpaper. Start by choosing a sturdy rope.

Now, use the drill to make holes in the rubber tire, allowing the rope to pass through. After drilling, use the sandpaper to smooth out rough edges around the holes.

Then, thread the rope through the holes and tie secure knots. Make sure to knot the ends of the rope to keep it from slipping.

14. DIY Goat Hay Feeder

To build a goat hay feeder, measure and cut the wooden planks to the size you want for your feeder.

Now, put together the frame using the screws and nails. Then, evenly space and attach the vertical slats to the front of the feeder.

Make sure to sand down any rough edges to avoid splinters. If you want, you can paint the feeder to give it a nice finish.

15. DIY Goat Balance Logs

Collect some large logs, a saw, and sandpaper. Choose large, sturdy logs that can withstand the goats.

Then, using the saw, cut the logs to the desired length. After cutting, sand down rough edges to make them safe for the goats.

Now, arrange the logs horizontally in the goat enclosure. Ensure the logs are stable and secure to prevent them from rolling.

16. DIY Goat Ladder

To create a simple ladder, gather wooden planks, screws, nails, a hammer, a saw, measuring tape, sandpaper, and paint (optional). 

Measure and cut the wooden planks to the desired length for the ladder’s sides and rungs. Place the sides parallel to each other and attach the rungs evenly spaced between them. 

Secure the rungs with screws and nails, making sure they are stable. Sand down any rough edges to prevent splinters. 

Paint the ladder if you like. Place the ladder in the goat enclosure, leaning it against a sturdy structure for the goats to climb.

17. DIY Goat Ball Pit

To build a fun ball pit, gather a large plastic container, plastic balls, sandpaper, and paint (optional). Choose a large, shallow container that goats can easily enter and exit. 

Sand down any rough edges to ensure safety. Fill the container with plastic balls. If desired, paint the container for a colorful touch. 

Place the ball pit in the goat enclosure and watch your goats enjoy exploring and playing in the balls.

18. DIY Goat Hanging Feeder

To make a hanging feeder, gather a large plastic bottle, rope, a drill, sandpaper, and some treats or hay. Drill holes around the sides of the bottle for the treats or hay to come out. 

Smooth any rough edges with sandpaper. Thread a piece of rope through the top of the bottle and knot it securely. 

Fill the bottle with treats or hay and hang it at a reachable height in the goat enclosure. The goats will enjoy trying to get the treats out.

19. DIY Goat Rope Maze

To create a rope maze, gather thick ropes, wooden stakes, a hammer, and sandpaper. Set up wooden stakes in the goat enclosure to form a maze layout. 

Thread the ropes through and around the stakes, creating various paths and challenges for the goats to navigate. Sand down any rough edges on the stakes to prevent injuries. 

Ensure the ropes are securely tied and stable. The goats will have fun exploring and figuring out the maze.

20. DIY Goat Tunnel Maze

Gather large cardboard boxes, duct tape, a utility knife, and sandpaper to build a tunnel maze. 

Cut the boxes to create tunnel sections, smoothing any rough edges with sandpaper. 

Use duct tape to connect the boxes, forming a maze with multiple paths and openings. Place the tunnel maze in the goat enclosure for them to explore and play in.

21. DIY Goat Sensory Wall

Gather various textures and materials such as brushes, ropes, fabric, and sandpaper to create a sensory wall. Attach these materials to a large wooden board using screws and nails. 

Ensure the materials are securely fastened and won’t come loose. Sand down any rough edges on the board. 

Place the sensory wall in the goat enclosure at an accessible height for the goats to interact with.

22. DIY Goat Jumping Hurdles

To build jumping hurdles, gather PVC pipes, connectors, a saw, sandpaper, and paint (optional). 

Cut the PVC pipes to the desired height for the hurdles and connect them with the connectors to form a simple hurdle frame. 

Sand down any rough edges on the pipes. If desired, paint the hurdles for a colorful touch. 

Set up the hurdles in the goat enclosure, spacing them appropriately for the goats to jump over.

23. DIY Goat Agility Course

To create an agility course, gather wooden planks, PVC pipes, tires, rope, screws, nails, a hammer, a saw, measuring tape, sandpaper, and paint (optional). 

Design a layout with various obstacles like jumps, tunnels, and balance beams. 

Construct each obstacle using the materials gathered, ensuring they are stable and safe. Sand down any rough edges. If desired, paint the obstacles for a colorful touch. 

Set up the agility course in the goat enclosure and let the goats have fun practicing their skills.

24. DIY Goat Sandbox

To build a sandbox, gather wooden planks, screws, nails, a hammer, a saw, measuring tape, sandpaper, and play sand. 

Measure and cut the wooden planks to form a frame for the sandbox. Secure the planks with screws and nails, making sure the frame is sturdy. Sand down any rough edges to prevent splinters. 

Fill the frame with play sand. Place the sandbox in the goat enclosure, providing the goats a fun and interactive digging area.

25. DIY Goat Foraging Box

To create a foraging box, gather a large plastic container, a drill, sandpaper, and some hay or treats. 

Drill several holes in the container, large enough for the goats to reach the treats inside. Smooth any rough edges with sandpaper. 

Fill the container with hay or treats. Place the foraging box in the goat enclosure, encouraging the goats to forage and find the treats.